GAIATITAN Series
For premium high fidelity speakers, offering remarkable improvement in sound clarity and openness.

INTRODUCTION

About GAIA-TITAN
speaker isolators

Modern high end speakers are exotic and perform with great accuracy, providing punch without missing the most subtle details. Similar to performance tires on a race car, the GAIA-TITAN’s allow high end speakers to reach their full potential, delivering remarkable natural openness and clarity.

GAIA-TITAN series feature the same patented isolation technology as the original award winning GAIA series. The GAIA-TITAN series has 3 models with weight limits ranging from 320 lbs to 620 lbs.

The GAIA isolators are machined stainless steel units that incorporate IsoAcoustics’ patented design to provide a high degree of speaker isolation, while resisting lateral movement and oscillations, to maintain accuracy and alignment with the listening position. Internal reflections from the hard supporting surface are attenuated resulting in greater sound clarity and openness.

The soundstage blossoms to open up a three-dimensional image of natural, spatial sound.

PRODUCTS

GAIA-TITAN Theis

For floor standing speakers and subwoofers weighing 320 lbs (145KG) or less.
Size
2.75” / 70mm (W) x 2”/ 50mm (H)
Thread
½”-13, M8-1.25 and M14-2.0

GAIA-TITAN Rhea

For floor standing speakers and subwoofers weighing 420 lbs (190KG) or less.
Size
3.15″ / 80mm (W) x 2.3″ / 58mm (H)
Thread
½”-13, M8-1.25 and M14-2.0

GAIA-TITAN Cronos

For floor standing speakers and subwoofers weighing 620 lbs (280KG) or less.
Size
3.94″ / 100mm (W) x 2.3″ / 58mm (H)
Thread
½”-13, M10-1.5 and M14-2.0

INSTALLATION

How to install
GAIA-TITAN isolators

The GAIA-TITAN models each come with 3 common thread sizes which will fit most speakers of this size. Alternate sizes are available through IsoAcoustics distributors.

The IsoAcoustics patented isolation design is directional. Optimal results are heard by installing the GAIA-TITAN isolators with the logo facing the listening position, or rotated 180 degrees, to align the isolators with the speaker’s motive forces.

The GAIA-TITAN’s lower isolator is designed to adhere to the supporting surface. For carpeted flooring, Carpet Discs are available for each GAIA-TITAN model which allow the isolators to connect to the solid flooring below.

THREAD SIZES

thread sizes for
all speakers

GAIA isolators come with thread adaptors for the 3 most common thread sizes which fit the majority of speakers. Alternative thread sizes are available upon request through IsoAcoustics distributors.

TECHNOLOGY

Patented isolation technology

GAIA isolators are made from a high quality stainless steel construction, incorporating the IsoAcoustics design philosophy that combines precision and a passion to deliver extraordinary acoustic results.

awards + Reviews

customer feedback

Optional Extras

Carpet Discs

Designed to maintain stable support on carpet, the optional Carpet Spikes work with the GAIA-TITAN isolators to provide improved performance on thicker pile carpet and carpet with under pads.

B&W Plate Adaptor

The B&W plate adapts the GAIA-TITAN to the Bowers & Wilkins Nautilus and Diamond series speakers. The ball-casters are removed and replaced with the B&W plate which provides a threaded hole for the appropriate stud to screw into.

B&W D3 Plate Adaptor

The B&W D3 plate adaptor replaces the wheels on B&W D3 speakers and provides a threaded hole for the appropriate GAIA stud to screw into.

M12 Vanity Cap (Sopra Cap)

The M12 Vanity Cap is a decorative cap that installs on top of the base of a speaker, attaching to M12 threads from the GAIA speaker isolators. The M12 Vanity Cap is commonly used with the Focal Sopra N1 & Sopra N2 Floor Standing Speakers.

F1 Speaker Jack

The F1 Jack is a tool designed to raise the side of a speaker to allow access underneath for the installation of the IsoAcoustics GAIA and GAIA-TITAN isolators.

FAQs

The GAIA model should be selected based on the weight that they are supporting. The weight limits we set are based on the performance curve. The GAIA perform well up to the specified weight limits, but once you are within 10% of the weight limit, we recommend using the next size up for best results. We do not recommend exceeding the weight limits of the GAIA’s or GAIA-TITAN’s.
We have found the best results by orienting the GAIA’s to be front-facing, in line with the listening position.

The GAIA’s and GAIA-TITAN isolators come with thread adaptors for the 3 most common thread sizes which fit the majority of speakers. The thread adaptor sizes included are as follows:

  • GAIA III – M6-1.0, M8-1.25 and ¼”-20
  • GAIA II – M6-1.0, M8-1.25, ¼”-20
  • GAIA I – M8-1.25, M12-1.25, ¼”-20
  • GAIA-TITAN Theis – M8-1.25, M14-2.0, ½”-13
  • GAIA-TITAN Rhea – M8-1.25, M14-2.0, ½”-13
  • GAIA-TITAN Cronos – M10-1.5, M14-2.0, ½”-13

A wide variety of alternative thread sizes are available upon request through IsoAcoustics distributors.

The GAIA isolators come with the 3 most common thread sizes. If you require a different size, they can be ordered through the dealer that is selling the GAIA’s, or through our distributor. Click Here for the contact information for our distributor for your country.

We recommend positioning furniture sliders underneath the GAIA-TITAN’s to help side the speaker into position. The F1 Speaker jack can also be a useful tool to help lift safely while moving the speaker.
The GAIA-TITAN’s can be used on carpeted flooring. For thick carpet with underpadding, we recommend the GAIA-TITAN carpet discs so that the GAIA’s have a solid surface to connect with. The carpet discs are not required for most applications with the GAIA-TITAN’s because most carpet becomes solid underneath the weight of heavy speakers.

1. Choose the correct threaded stud for your speakers, thread into GAIA, and tighten with the wrench provided.

2. Install locking nut and tighten by hand up against GAIA Housing.

3. Add locking nut to the upper threaded section.

4. Thread stud into the speaker (minimum 4 complete turns), align logo with the listening position and tighten locking nut up against the bottom of the speaker.

We do not recommend exceeding the specified weight limit. The weight limits are set based on the performance curve, not based on how much weight they can support. The performance of the GAIA is still strong at the weight limit but is quickly declining above this weight. If your speakers are within 10% of the weight limit, we recommend using a larger GAIA model for the best results.

Please click here for information on thread sizes and instructions on how to determine the thread size for your speaker or subwoofer.

Each model of GAIA Isolator comes with 3 common thread sizes. If none of these meet your needs, we also have many other thread sizes available through our distributors.

The threads included with the GAIA’s are as follows:

The GAIA I includes M12-1.25, M8-1.25 and 1/4”-20

The GAIA II includes M8-1.25, M6-1.0 and 1/4”-20

The GAIA III includes M8-1.25, M6-1.0 and 1/4”-20

Click here for more information on thread sizes and instructions on how to determine the thread size for your speaker or subwoofer.

Check our online calculator first to see if we have a recommendation specifically for your model of speaker, subwoofer, or equipment. The calculator will often list the thread size used by your speaker. If you have any uncertainty, you can submit questions through the online calculator. A representative from IsoAcoustics will typically respond within 24 hours.
Optimal results are achieved by installing the GAIA-TITAN isolators with the logo facing forward, in line with the speaker’s drivers. Alternatively, they can be rotated 180 degrees to face the rear. The isolators are directional and are designed to be aligned with the speaker’s motive forces.

RELATED PRODUCTS

F1 SPEAKER JACK

GAIA installation is now easier than ever

Find an IsoAcoustics dealer near you

Please select Product type:

Find an IsoAcoustics dealer near you

Please select your location:

Find an IsoAcoustics dealer near you

Please select your location: