V120

Truss Clamp 2.0"

Attach the V120 isolation mount on 2” (50mm) truss.

key features

Mount the IsoAcoustics V120 to 2.0” (50mm) truss

The sturdy aluminium V120 Truss Clamp wraps around the truss and tightens with an adjustable knob to ensure a tight, reliable connection and long-lasting performance.

specs

Dimensions (LxWxH) 5.25” x 4” x 2” (133mm x 102mm x 51mm)
Weight 0.3lbs (0.136kg)
isoacoustics-v120-truss-clamp-2-specs

application

The V120 Truss Clamp as part of your V120 Mount setup

This product works as part of the V120 Mount system.

Take a look at our visual guide to see if it is the right fit for your setup.

You can also mount your V120 to the wall, ceiling, and unistrut.

View fullscreen

Related Products

Studio monitor isolation mount for ceilings and walls.
Attach the V120 isolation mount on 1.5” (38mm) truss.
Attaches your speaker to the V120 L-Bracket or C-Bracket with four mounting holes that are positioned 2” W x 4 ¼” H (50.8 x 107.9mm).

Attaches your speaker to the V120 L-Bracket or C-Bracket with four mounting holes that are positioned 4 ¼” W x 2” H (107.9 x 50.8mm).

Attaches your speaker to the V120 L-Bracket or C-Bracket with mounting holes that are positioned 1.38” W x 2.36” H (35 x 60mm). Compatible with Perlisten Audio models S4b, R4b, R5m, S4s and R4s.
Attaches your speaker to the V120 L-Bracket or C-Bracket with horizontal mounting holes between 2 ¾” to 3” (70-76.2mm) apart.
Bolts to the bottom of the V120 Mount and connects to speakers mounted on U brackets.
Mounts speakers to the V120 isolation mount. Positions speakers facing downwards and can be tilted upwards by 45 degrees.
Mounts speakers to the V120 isolation mount. Positions speakers facing forwards and can be tilted down by 45 degrees. Adjustable height.

FAQs

The thread size for the top of the V120 mount is M10-1.5.
We recommend first checking the IsoAcoustics Product Selector to check if a specific speaker model is compatible with the V120 and determine which brackets and adapters are required. If a model is not listed in the Product Selector, we recommend submitting an inquiry to IsoAcoustics by email to [email protected]. The V120 is only compatible with speakers that have threaded connection points located on the back of the studio monitor, or have threaded connection points on the sides of the speaker and U bracket must be available for the speaker to connect to the V120. Please check the V120 U-Bracket Adapter to verify if the U bracket is compatible with the V120 U Bracket Adapter. If the threaded inserts are located on the back, the hole pattern must match the V120 bracket with a spacing of 2.75” to 3” vertical (70-76mm), or match one of the V120 adapters.  
The V120 adds between 3.5” to 6.3” (90 to 160mm) with the ceiling plate installed. When installing with the L-Bracket, V120 will add 3.5” (90mm) or more, depending on the gap between the speaker and the L-Bracket. When using the C-Bracket, the connection to the speaker will be approximately 6.3” (160mm), but the gap from the speaker to the ceiling will be less when the speaker is tilted. When attaching to the bottom flange with the U Bracket Adapter, the V120 will add 4.17” (106mm).

Find an IsoAcoustics dealer near you

Please select your location:

Find an IsoAcoustics dealer near you

Please select your location:

Find an IsoAcoustics dealer near you

Please select Product type:

Find an IsoAcoustics dealer near you

Please select your location: